If you're like me, then you have multiple Macs with IR sensors in the same room. What happens when you push the menu button on your Apple remote? Chances are it will launch Front Row on every Mac in the room. I had this problem until I discovered Apple remote pairing.
To pair your remote with a specific Mac or Apple TV, just hold down the menu and the next (fast forward) buttons for 5 seconds making sure you're within 5 inches of the IR sensor on the device.
You can unpair a remote by going into System Preferences (Apple menu > System Preferences) and click security. From the Security System Preference pane, select the "Unpair" button at the bottom the preference pane.
Lastly, you can disable the use of remotes all together. To do this, head back to the Security System Preference pane and click the check box labeled "Disable remote control infrared receiver." This will keep rogue remotes away from your Mac.
Today Apple released the 2.1 update for the Apple TV. The main new features of this update are MobileMe and support for Remote.app (Apple's Remote application for iPhone/iPod touch users).
Telling readers what the update did is one thing, but showing is a completely different story, that's why we went the extra mile to bring you a walkthrough of the new features in the 2.1 update. So check out our gallery of Apple TV 2.1 screenshots.
To commemorate the launch of MobileMe, Apple has updated the Apple TV to work with the new service. The new update includes a new MobileMe sub-menu in the Photos menu.
MacRumors is reporting that you will also be able to control your Apple TV using the free Remote app from the iTunes Store. You can download this update by going to Settings > General > Software Update.
If you notice anything that we haven't, be sure to leave a comment!
It's June, you're bored, and you're looking at that 40GB AppleTV sitting on your media center. The next thing you know, you've bought a solid-state drive (SSD) and created the world's first (as far as we know) SSD-equipped Apple TV.
Josh Lee modded his original AppleTV not to increase the size of the drive -- he's using a 32GB Transcend SSD since he stores most of his media on NAS -- or speed it up. In fact, it sounds like he did the mod just for the hell of it. The benefits of the mod include less heat generation by the AppleTV and almost silent operation.
Josh reports in his email to AppleTVHacks that all he had to do was take an image of his AppleTV drive, mount it, resize the media partition, DD the image to the SSD , do a factory restore, use the patch2stick, and the SSD was quickly up and running. Whew!
Your challenge, TUAW reader, is to nab one of those fast 256GB Samsung SSD's when they ship this fall and use the Josh Lee method to create a fast, cool, and silent FrankenAppleTV. If you're the first, tell us about it.
A big thank you to Luck for the pointer to AppleTVHacks
Just the other day I was thinking about how it might be possible to do something like this app reader Jason kindly dropped us a tip about: AirRemote is an application, soon to be released on the App Store, that's supposed to turn your iPhone or iPod touch into a television remote control. The first catch is that the app costs $99, and the second catch is that you have to buy an extra box (for about $150) to actually the signals to the TV. That's the hardest part about this whole iPhone-as-remote thing -- it's super easy to program the iPhone to do what you want, but it's much harder to get the TV or entertainment center to understand it. Most televisions aren't equipped with Bluetooth or WiFi, and Apple neglected to include an IR transmitter even in the 3G.
But surely it's got to be possible at some point, right? Apps like telekinesis easily let you do a little remote computing, so the real trick here is just getting the TV in on the communications. It's too bad Apple's own little set-top box doesn't make it too easy (though maybe the wifi might let hackers do something with a little tweaking), but then again, maybe they don't want any competition for their own remote.
Of course, buying an iPhone or iPod touch just to control your TV is a waste of money -- there are much cheaper remotes that will work much better. But in the interests of combining functions into one device, it sure would be useful to be able to do everything from one screen.
If you find yourself looking at your Apple TV every Tuesday to learn what new releases Apple and the movie studios have blessed us with, then you might find Apple TV Junkie really useful. That's because Apple TV Junkie posts all of the new releases of High Definition rentals -- along with other important Apple TV news.
In one glance of the page you can find out:
The $.99 movie rental of the week
How many HD movies grace the iTunes shelves
Top 10 movie purchases
Top 10 movie rentals
So, if you're always looking for the hotest new movie rentals on the Apple TV and iTunes, you can make Apple TV Junkie your first stop.
Parties can sometimes be boring, but with a Mac with an iSight and an Apple TV, you can liven up any party! In this how-to, I am going to show you how to create an Automator workflow that will take pictures at specified times and sync them over to your Apple TV, all without you ever lifting a finger. This Automator workflow is fantastic when you have people over for a party they can head over to your Mac, take a crazy picture of themselves and have it synced over to the Apple TV in the living room.
Continue reading to learn how to make this Automator workflow.
Rogue Amoeba has announced Airfoil 3.2, the latest release of their audio utility which allows you to play any Mac audio over your Apple TV, AirPort Express, or other Macs. In addition to improving support for the latest generation Expresses ("including full password support and better synchronization"), the big addition with version 3.2 is remote control support. With either the Apple Remote on the Apple TV or the Keyspan Express Remote for an Express, Airfoil now allows you to play/pause and move forward/back on tracks playing through either iTunes or QuickTime Player.
The upgrade is free for registered users, while new copies of Airfoil for Mac are $25; a demo is available.
If you have an Apple TV and are interested in some of the exciting things you can do by hacking it (e.g. adding additional video codec support like divx, etc.) but have been too chicken to try it yourself, you may be interested in the aTV Flash from Apple Core. Basically the aTV Flash is a patchstick -- a USB flash drive preloaded with software to modify the Apple TV OS. You just plug it in to your Apple TV and it automatically hacks your Apple TV to add multiple codec support, SSH access, the Couch Surfer browser, and much more.
The aTV Flash is compatible with the current Apple TV Take Two and they offer free updates for a year. However, all this convenience will cost you -- $59.95 to be precise. It's also worth keeping in mind that all of this can be done for little or no cost if you want to get your hands dirty. But if the convenience of a plug and play option is worth it to you the aTV Flash may be worth checking out.
When I was a lad in Pennsylvania, renting a movie meant driving to Scranton Video (this is pre-Blockbuster, boys and girls) and crossing your fingers in hopes that something you actually want to watch will be among the four dozen VHS tapes they had in stock. Of course, the previous customer didn't rewind the tape before returning it.
A few years later, Blockbuster provided a much larger collection of unwound movies I didn't want to see. Eventually, Netflix took the inconvenient travel out of the equation (except for us small-town folk with PO Boxes) by sending movies through the mail. And there was much rejoicing.
Today, services like On Demand and Apple TV have eliminated the taxing walk to your mailbox by delivering movies directly to your television. Customers can rent, download and watch a hit movie faster than you can say "sedentary lifestyle." And Netflix wants a piece of the (in)action.
Neflix and Roku have produced the Netflix Player, a $99US set top box that allows Netflix customers to stream any of the 10,000 available movies and TV shows. It connects via HDMI, composite, or component, and allows users to browse the library and make selections with the remote.
At one hundred bucks, it's less expensive than an Apple TV, but it also does a lot less -- no iTunes or iPhoto synchronization, current trailers, etc. It's not a real threat to the Apple TV, but evidence that the set top box is here to say.
In a recent Ask TUAW we addressed a question about getting divx video files to register properly as TV Shows in Front Row. In the discussion that followed one of our readers suggested VideoDrive as an easy way of accomplishing this. Basically, VideoDrive allows you to import your videos into iTunes without converting them, while still having full control over the metadata, including the tags that control placing videos either in the TV Shows or Movie categories. That way they will appear in the appropriate submenus in both Front Row and on the Apple TV. VideoDrive can also download cover art form Amazon as well as clean up file names and more. Keep in mind, however, that the appropriate codecs must already be installed to use this (check our Perian for this purpose).
VideoDrive is €12.99 (~$20) and a demo limited to 12 videos is available for download.
As we posted earlier today, Apple announced that several movie studios will now be releasing digital versions of their movies for sale on the same day as the DVD. Even Apple TV users can get in on the fun. You now have the option of buying movies directly on your Apple TV, whereas before today you could only rent movies from Apple TV. Sure, it's not groundbreaking considering you could buy the movie on your Mac and transfer it to your Apple TV, but it's nice to see the added layer of convenience.
Apple TV owners will also note a new "Top Sellers" category in the "Top Movies" page, an additional option for those times when you want to crowdsource your movie selection.
If the native hackability of the version of OS X on the Apple TV isn't enough for you, there's now a convenient boot loader that allows you to install linux. This also opens up the possibility of running linux based video software, particularly MPlayer, Myth TV, and XMBC. Further, since there are linux drivers for the NVIDIA hardware decoder in the Apple TV there's also the possibility of higher resolution 1080i output as opposed to the 720p it's normally limited to.
Unfortunately, this is project is still in the early stages and none of this is working perfectly yet. Nonetheless, it's a interesting development on the Apple TV hacking front.
Apple TV Source notes that the latest 2.0.2 update makes internet radio work a little better with the Apple TV. Basically you can play internet radio streams on the Apple TV if you have it synced to an iTunes computer with a playlist containing the streams. Before the update the source computer had to be on for this to work. Now, however, the Apple TV will retain the playlist even without the iTunes computer until it is restarted (it will retain the playlists even if put to sleep). The original post has complete instructions.
An anonymous tipster tells TUAW that according to code found in the latest firmware release, Apple is working on a new iPhone application called iControl. Like Apple TV and other remote controllers, it would allow the iPhone to connect wirelessly to local iTunes libraries and browse through and play media from those sources.
TUAW is told that a media navigator will allow you to view videos, play podcasts, listen to music and even support shuffle playback. The screenshot shown here shows some of the localizable strings for the iPhone-based application. There's obviously no timeline for release, but since the SDK event back in February, it's been rumored that Apple would release some official iPhone apps of their own, and iControl might be the first.
Update: The data is so thin on the ground that it's hard to respond to readers who have asked whether this will be a "Back to my iTunes" application. Just having local Bonjour support wouldn't be all that useful. Apparently a screenshot of the bundle (not apparently a real application) here
If you're like me, then you have multiple Macs with IR sensors in the same room. What happens when you push the menu button on your Apple remote? Chances are it will launch Front Row on every Mac in the room. I had this problem until I discovered Apple remote pairing. 
Today Apple released the 
It's June, you're bored, and you're looking at that 40GB 
Just the other day I was thinking about how it might be possible to do something like this app 
If you find yourself looking at your Apple TV every Tuesday to learn what new releases Apple and the movie studios have blessed us with, then you might find 
Parties can sometimes be boring, but with a Mac with an iSight and an Apple TV, you can liven up any party! In this how-to, I am going to show you how to create an Automator workflow that will take pictures at specified times and sync them over to your Apple TV, all without you ever lifting a finger. This Automator workflow is fantastic when you have people over for a party they can head over to your Mac, take a crazy picture of themselves and have it synced over to the Apple TV in the living room. 
Rogue Amoeba has 
When I was a lad in Pennsylvania, renting a movie meant driving to Scranton Video (this is pre-Blockbuster, boys and girls) and crossing your fingers in hopes that something you actually want to watch will be among the four dozen VHS tapes they had in stock. Of course, the previous customer didn't rewind the tape before returning it.
In a recent 
As we 
If the native hackability of the version of OS X on the Apple TV isn't enough for you, there's now a 
